1. It is very important to test the shrinkage of the fabric before cutting, and adjust the pattern according to the shrinkage.

2. The main process of knitting garments is to hem, which depends on the density, width, thread color and quality of the hem.

3. The hand gesture problem of the handover. For example, two trouser legs are generally long and short when they are made in a factory. To reduce the gap between the legs of long shorts, a turner’s gesture must be required. The leg of the trousers I just put on is driven up to the crotch, so the lathe is asked to pull the fabric a little bit. When changing to the other trouser leg, drive to the trouser opening. At this time, the fabric should not be pulled, but the fabric should be pushed.

4. The shrinkage problem of accessories. Knitted garments sometimes need to be equipped with some webbing, elastic and other accessories, but the shrinkage of these accessories is difficult to match the fabric. At this time, the factory must be required to pre-shrink the fabric. (After pre-shrinking machine), all kinds of auxiliary materials with shrinkage rate can be ironed first and then made.

5. Post-ironing is very important. The phenomenon of long and short sleeves and deformation of various parts during processing can be adjusted by ironing. It can be said that most of knitted garments are ironed.

6. Others are the general routines to pay attention to.